EnGenius Technologies DuraFon 4X - Manual (Page 11)

19
Additional Base Station Features
1. 4-channel Auto-Attendant
a. 4 Auto-Attendant can be active at the same time in case of
4 simultaneous incoming calls.
b. Allows private paging to a single handset (with individual
Handset ID) or group paging to a group of handsets (with
Group ID).
c. Per line AA enable/disable by administrator.
When disabled for a line, the administrator can set all
handsets to ring with an incoming call on that line, or a
particular Handset/Group ID (either one; not
simultaneously) can be assigned to have both incoming
and outgoing call privileges on that line. See AA
Configuration by Administrator.
d. Up to 128 seconds customizable main greeting message.
2. Optional Outdoor Antenna Kit with cable
Administrator Features
Handsets 10 and 11 are designated administrators. Both have the
same authority to perform base station administrative functions
from their handset menu selections. No password is required.
1. Supports both DTMF and Pulse dialing
a. From an administrator handset (Handset 10 or 11 ), press
MENU-9-2-3 to select Tone or Pulse dialing mode.
b. Default is Tone dialing.
2. Administrator programmable Flash key timing
a. From an administrator handset (Handset 10 or 11), press
MENU-9-2-4 to select flash key timing
b. 9-level (100 ms - 900 ms) timing selections, default= 600
ms.
c. The default value (600 ms) works in most areas.
Changing this setting may result in Flash function not
working. Change only when you are certain of the new
value would work.
3. Call Transfer to PBX Extension
a. When install the DuraFon 4X is installed behind a PBX
20
system, you can pre-program the feature code of call
transfer function.
b. Need to adjust the Flash time to match your PBX setting.