Avago Technologies SAS 9207-4i4e Host Bus Adapter User Manual
Page 9

LSI Corporation
- 9 -
SAS-2 Integrated RAID Configuration Utility (SAS2IRCU) User Guide
November 2012
Commands
Enclosure # : 1
Slot # : 0
SAS Address : 5000c50-0-1ab7-3406
State : Optimal (OPT)
Size (in MB)/(in sectors) : 140014/286749487
Manufacturer : SEAGATE
Model Number : ST9146852SS
Firmware Revision : 0005
Serial No : 6TB008T700009038TL1L
GUID : 5000c5001ab73407
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 1
Slot # : 1
SAS Address : 5000c50-0-33ba-3d0e
State : Optimal (OPT)
Size (in MB)/(in sectors) : 286102/585937499
Manufacturer : SEAGATE
Model Number : ST9300603SS
Firmware Revision : 0006
Serial No : 6SE35RZL0000B134JFS2
GUID : 5000c50033ba3d0f
Protocol : SAS
Drive Type : SAS_HDD
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 51234567:89012345
Numslots : 8
StartSlot : 0
Primary Boot Slot : 2
SAS2IRCU: Command DISPLAY Completed Successfully.
Integrated RAID Volume State values are as follows:
Okay (OKY) – The volume is active and drives are functioning properly. User data is protected if the current
RAID level provides data protection.
Degraded (DGD) – The volume is active. User data is not fully protected because the configuration has changed
or a drive has failed.
Failed (FLD) – The volume has failed.
Missing (MIS) – The volume is missing.
Initializing (INIT) – The volume is initializing.
Online (ONL) – The volume is online.
Physical device State values are as follows:
Online (ONL) – The drive is operational and is part of a volume.
Hot Spare (HSP) – The drive is a hot spare that is available to replace a failed drive in a volume.
Ready (RDY) – The drive is ready for use as a normal disk drive, or it is ready to be assigned to a volume or a hot
spare pool.
Available (AVL) – The drive might not be ready, and it is not suitable for use in a volume or a hot spare pool.
Failed (FLD) – The drive failed and is now offline.