Avago Technologies SAS 9207-4i4e Host Bus Adapter - Manual (Page 11)

LSI Corporation
- 11 -
SAS-2 Integrated RAID Configuration Utility (SAS2IRCU) User Guide 
November 2012
Commands
3.7 STATUS
The STATUS command displays the current status of any existing Integrated RAID volumes and the status of any
operation that is currently in progress on the selected controller. If no operation is in progress, SAS2IRCU prints a
message indicating this condition before it exits.
3.7.1 Command Line
sas2ircu <controller_#> status
3.7.2 Parameters
 <controller_#> – The index of the controller with the volumes whose status you want to display.
3.7.3 Program Return Value
0x00 SUCCESS: Command completed successfully.
0x01 FAILURE: Bad command-line arguments or operational failure.
0x02 ADAPTER_NOT_FOUND: Cannot find specified adapter.
3.7.4 Sample Output
Following is an example of the information that the STATUS command returns. In this example, a volume
resynchronization is in progress on IR Volume 1, and no operation is in progress on IR Volume 2.
Background command progress status for controller 0...
IR Volume 1
Volume ID
: 6
PI Supported : Yes
PI Enabled : Yes
Current operation : Synchronize
Volume status : Enabled
Volume state : Degraded
Volume wwid : 0e0651445de1ee60
Physical disk I/Os : Not quiesced
Volume size (in sectors) : 70311936
Number of remaining sectors : 68250624
Percentage complete : 2.93% IR Volume 2
IR Volume 1
Current operation
: None
Volume ID : 6
Volume status : Enabled
Volume state : Optimal
Volume wwid : 0e0651445de1ee60
Physical disk I/Os : Not quiesced
The possible values for the fields in the status data are as follows:
 Current operation: Synchronize, Consistency Check, OCE, Background Init, or None
 Volume status: Enabled or Disabled
 Volume state: [Inactive] Optimal, Degraded, Missing, or Failed
 Physical disk I/Os: Quiesced or Not quiesced