Epson AcuLaser CX11N - Manual (Page 5)

Welcome
5
Welcome
1
This guide describes how to set up your Epson AcuLaser ® CX11N/CX11NF and
install the software so that you can print, copy, scan, and fax (CX11NF only).
Please follow these guidelines throughout:
Warning:
Warnings must be followed carefully to avoid bodily injury.
Caution:
Cautions must be observed to avoid damage to your equipment.
Note:
Notes contain important information about your product.
Tip:
Tips contain hints for better printing, scanning, copying, and faxing.
Unpacking
Your AcuLaser CX11N/CX11NF includes the following:
■ 4 toner cartridges (Cyan, Magenta, Yellow, Black)
■ Photoconductor unit
■ USB cable
■ Power cord
■ Documentation: Setup Guide, Basics Guide, Fax Guide (fax model only)
■ 3 software CD-ROMs
■ RJ-11 cable (CX11NF only)
■ 500-Sheet Paper Cassette Unit (optional)
Note:
The instructions in this guide apply to both the CX11N and CX11NF unless otherwise noted.
The illustrations show the CX11NF, but the instructions are the same unless otherwise noted.