Epson AcuLaser CX11N - Manual (Page 15)

Install Software
15
6. If you have the CX11NF, place the Status Sheet face up on the Auto Document
Feeder.
If you have the CX11N, place the Status Sheet face down on the document table.
7. Press the Copy button on the control panel to enter the Copy mode.
8. Press the
x B&W Start button.
The Status Sheet is copied.
Install Software
The software must be installed on each computer that will be using the CX11N.
Windows ®
1. Make sure the CX11N is not connected to your computer.
Note:
If you see a screen like this, click Cancel and disconnect the USB cable. You
cannot install your software that way.
2. Insert the Epson CD-ROM into the CD drive of your computer.