Avago Technologies MegaRAID SAS 9266-4i - Manual (Page 7)

LSI Corporation
- 7 -
MegaRAID LSIiBBU09 Intelligent Battery Backup Unit Quick Installation Guide
August 2012 Connecting a Remote LSIiBBU09 Unit to a MegaRAID SAS 9266 RAID Controller
Reinstalling the RAID Controller on the Motherboard
Figure 3 Reinstalling the RAID Controller
5. Replace the computer cover, and reattach the power cords.
6. Turn on the power to the computer.
Connecting a Remote LSIiBBU09 Unit to a MegaRAID SAS 9266 RAID Controller
The procedures in this section show how to connect a remote LSIiBBU09 unit by cable to your MegaRAID SAS 9266-4i
RAID controller or a MegaRAID SAS 9266-8i RAID controller.
To connect a remote LSIiBBU09 unit to your RAID controller, perform the following tasks.
1. Remove the RAID controller from the computer. See Removing the RAID Controller from the Computer on page 8 .
2. Connect the cable between the RAID controller and the remote LSIiBBU09 unit. See Connecting the Cable
Between the RAID Controller and the Remote LSIiBBU09 Unit on page 8 .
3. Reinstall the RAID controller in the computer. See Reinstalling the RAID Controller in the Computer on page 9 .
Edge of
Motherboard
PCI Express
Bracket
Screw
Press
Here
Press
Here
3_00891a-00