Using the securestack c2 manual set – Enterasys Networks SecureStack C2 C2RPS-POE User Manual
Page 14
Using the SecureStack C2 Manual Set
xii About this Guide
Using the SecureStack C2 Manual Set
Other manuals have been developed for the SecureStack C2 PoE switch devices that can
be connected to the C2RPS‐POE power supply for power redundancy.
The SecureStack C2 switch manuals explain how to install the switch device, connect
network cable segments to the SecureStack C2 switch device, and configure the switch
device using the command line interface commands described in the SecureStack C2
Configuraton Guide.
Each manual is written for qualified personnel who are responsible for installing the
switch device and also have a general working knowledge of data communications
networks and their physical layer components.
The manuals can be accessed on the World Wide Web, using the following URL:
Caution: The C2RPS-POE power supply does not support non-PoE compliant
SecureStack C2 switches. Do not try to connect the power cable from this C2RPS-POE
power supply to any
SecureStack
C2 stackable switch that does not have a “P” suffix in
the model name, such as C2G124-24. Otherwise, damage to the device may result.
Precaución: La fuente de poder C2RPS-POE no es compatible con switches
SecureStack C2 que no cumplan con el estándar PoE.No intente conectar el cable de
corriente de esta fuente de poder C2RPS-POE a switch SecureStack C2 que no tenga el
sufijo “P” en el nombre del modelo. (Ejemplo: C2G124-24.) De lo contrario, el dispositivo
puede dañarse.
Note: Connection of the C2RPS-POE power supply does not require the reconfiguration
of the connected Ethernet Switch.