DE DIETRICH LZ9619E1 - Manual (Page 30)

GB
30
Something not working?
Problems which you can resolve yourself.
Problem Possible cause
• The machine does not start up: • The door is not firmly closed. (E20)
• The machine is not plugged in or there is
no power at the socket.
• The main fuse has blown.
• The programme selector dial is not
positioned correctly and the
START/PAUSE button has not been
depressed.
• The DELAY START OPTION has been
selected.
• The machine does not fill:
• The machine fills then empties
immediately:
• The machine does not empty and/or
does not spin:
• There is water on the floor:
• The water tap is closed. (E00)
• The inlet hose is squashed or kinked.(E00)
• The filter in the inlet hose is blocked.(E00)
• The door is not properly closed. (E20)
• The end of the drain hose is too low.
Refer to relevant paragraph in “water
drainage” section.
• The drain hose is squashed or kinked.(E10)
• The RINSE HOLD option
has been
selected.
• The drain filter is clogged. (E10)
• Too much detergent or unsuitable
detergent (creates too much foam) has
been used.
• Check whether there are any leaks from
one of the inlet hose fittings. It is not
always easy to see this as the water runs
down the hose; check to see if it is damp.
• The drain hose is damaged.
During machine operation the following alarm codes may be displayed:
- E00: problem with the water supply
- E10: problem with water draining
- E20: door open
Once the problem has been eliminated, press the START/PAUSE button to restart the pro-
gramme. If after all checks, the problem persists, contact your local Service Centre.