DE DIETRICH LZ9619E1 - Manual (Page 10)

Building-in
This appliance has been designed to be
built into the kitchen furniture.
The recess should have the dimensions
shown in picture A.
Preparation and assembly of
the door
The machine is originally pre-arranged for
the assembly of a door opening from right to
left.
In this case it is sufficient to screw in the
hinges (1) and the counter-magnet (6)
provided with the appliance, at the right
level (Fig. B).
4
1
2
3
6
1
2
3
P0982
7
B
5
P0965
820 min
600 min.
600
596
416
176,5
818
541
195
490
160
120
90
8
515
165 A
a) Door
The dimensions of the door should be:
- width 595-598 mm
- thickness 16-22 mm
The height (C-Fig. C) depends on the height
of the adjacent furniture’s base.
b) Hinges
To mount the hinges it is necessary to drill
two holes (dia. 35 mm, depth 14 mm) on the
inner side of the door. The distance between
the holes must be 416 mm.
The distance (B) from upper edge of the
door to the centre of the hole depends on
the adjacent furniture’s dimensions.
The required dimensions are given in the
picture C.
The hinges will be fixed to the door by
means of screws for wood (2-Fig. B).
Ø 35 mm - Depth 14 mm
16-22
B
C
22+1,5
595-598
416
P0026
C
GB
10