Replacing the remote control batteries – Epson 485Wi User Manual
Page 180
3.
Select the Reset menu and press Enter.
4.
Select Reset Lamp Hours and press Enter.
You see a prompt asking if you want to reset the lamp hours.
5.
Select Yes and press Enter.
6.
Press Menu or Esc to exit the menus.
Parent topic:
Related tasks
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
180