Setting up a wirelesshd connection – Epson 3010E User Manual
Page 57
Using WirelessHD
57
Setting Up a WirelessHD Connection
To prepare your device to work with the
WirelessHD
button, follow these steps:
1. Follow the instructions on the previous page and place the transmitter within range of the
projector.
2. Plug the AC adapter into the transmitter and an electrical outlet.
3. Connect an HDMI cable to your video device and the HDMI port on the side of the
WirelessHD Transmitter.
4. Turn on the power switch on the back of the transmitter.
5. Turn on your source device and begin playback.
6. Turn on the projector.
7. Press the
WirelessHD
button on the projector remote control.
Your projector should now display content from your video device. If it doesn’t, see “Solving
WirelessHD Problems” on page 75.
pl3010_3010e_UG.book Page 57 Wednesday, September 7, 2011 6:28 PM