Selecting memory settings, Renaming memory settings – Epson 3010E User Manual
Page 50
50
Making Detailed Adjustments
Selecting Memory Settings
You can easily recall the memory settings by using the
Memory
button on the remote control.
1. Press the
Memory
button on the remote control.
2. Select
Load Memory
.
3. Use the arrow buttons to select the desired setting, then
press the
Enter
button.
After a moment, the image appears on the screen using the retrieved settings. Certain
settings may not be applied, depending on the input signal.
Renaming Memory Settings
You can rename memory settings so that they are easier for you to recognize.
1. Press the
Memory
button on the remote control.
2. Select
Rename Memory
.
3. Select the memory name you want to change, then press the
Enter
button. The name
selection screen is displayed.
4. Do one of the following:
■
To select a name from the displayed preset names, select the desired name and press
the
Enter
button.
■
To create your own name, select
Customized
and use the keyboard screen to enter
the name. Use the arrow buttons to select a character, then press the
Enter
button.
When you have selected all of the characters in your name, select
Finish
and press the
Enter
button.
pl3010_3010e_UG.book Page 50 Wednesday, September 7, 2011 6:28 PM