Whelen 295HFSA7 - Manual (Page 2)

Page 2
Flush Mount
Siren Input Connector
P/N 46-0746511-00
Control Head / Flush Mount
P/N 01-0269919-00
Bail Strap Mount
Installation Kit
P/N 01-0463232-00
Mounting Bracket
P/N 07-241559-000
Control Head
Console Mount
P/N 01-0269199-01
Siren Input Connector
P/N 46-0746511-00
Flush Mount: The flush mount unit can be mounted in
a console or other location. Using the measurements
below, cut the hole for the control head, then slide the
unit in. Mark and drill the four mounting holes for the
customer supplied mounting hardware.
Important: Mounting will require drilling. It is absolutely necessary
to make sure that no vehicle components behind the mounting area
will be damaged. If damage is possible, Select another location.
Installation: There are two mounting styles for the
siren control head depending on the model purchased.
Bail Strap Mount: is Th unit uses a bail strap that can
be attached under the dash. Follow the diagram above for assembly
of the bracket. You will need to supply the screws that attach the
bracket to the vehicle.
Installation: Control Head
Congratulations on selecting the 295HFSA7 / 295HFSA8 Siren! This product offers a unique and distinctive collection of features designed to allow the
user to customize the operation of this siren to suit their individual wants or needs.
• 8 Programmable operating profiles
• Switch or ignition activated panel
illumination.
• Stereo (dual) or mono sound control.
• 200 Watts of output power.
• Removable microphone.
• “Siren In Use” output signal.
• Hands-Free operation.
• Radio Repeat.
• Simulated mechanical siren tones.
• Harmonically-rich, composite
Airhorn tones.
• Title 13-compliant profiles.
• Independent, non-destructive short
circuit protection.
5.5"
Mounting Screws (Qty. 4)
2.25"
SIDE VIEW
1.35”
1.875"
1-7/8”
CUT-OUT THIS AREA CUT-OUT THIS AREA
For Flush Mounting Only For Flush Mounting Only
IMPORTANT: Template not to scale.