Whelen M6FC600 User Manual

Automotive: li ghtheads, Automot ive: li ghtheads

Page 1

Gasket

Bushing

#8x1" PPHSMS

M6 Flange

Mounting Gasket

#8x1"

PPHSMS

Grommet

M6 Lighthead

Automotive:

ghtheads

Installation Guide:

600 Series to M6 Series Flange Adapter

Model M6FC600

ENGINEERING COMPANY INC.

Internet: www.whelen.com
Sales e-mail: [email protected]
Canadian Sales e-mail: [email protected]
Customer Service e-mail: [email protected]

For warranty information regarding this product, visit www.whelen.com/warranty

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

Mounting:

1. Remove the existing 600 series lighthead and gasket

from the mounting surface.

2. Mark the M6 flange mounting hole locations onto the

mounting surface either by using the flange as a
template or the measurements shown. Drill four, 1/4”
mounting holes.

3. Insert two #8 square grommets into the M6 flange and

secure lighthead to flange with two #8 sheet metal
screws.

NOTE: Due to application varriations, cutting and/or
drilling may be required for the square grommets.

4. Secure the lighthead assembly to the vehicle as shown

using the hardware provided.

5. Extend the wires to your power source and connect as

shown in the lighthead manual.

M6 Mounting Configuration

All Mounting Holes - .250" Dia.

6.5"

3.5"