Whelen 70F000AR - Manual (Page 2)

Page 2
Available Mounting Options
Housing (w/studs):
Housing:
Mounting Hardware & Gasket: 11-483530-011
11-483530-111
01-0483596-00
Housing:
Housing w/Studs:
Mounting Hardware & Gasket: 11-463255-011
11-463255-111
01-0463331-00
Surface Mount Housing:
Black:
Chrome:
01-0464758-00
01-0464758-01
Lighthead Housing:
Drivers Side:
Passengers Side:
01-0462735-01
01-0462736-01
KIT / 700 Flange Halogen / Strobe 15° Surface Mount
WHITE /
/ CHROME / BLACK 01-0484709-02 / 01-0484709-01 01-0484709-00
BLACK +12VDC / BRAKE
(-) GROUND
RED +12VDC / TAIL
WHITE
BRAKE/
TAIL/TURN
or ARROW
WHITE
RED +12VDC
(-) GROUND
BACK-UP or
SCENELIGHT
Installation:
1. Using the measurements in the mounting diagram, mark off the 4 mounting holes and center cut-out.
2. Drill the 4 mounting holes and cut-out center area using the measurements shown here.
3. Attach the lighthead securely to the vehicle using the 4 Phillips head sheet metal screws and flange grommet supplied.
4. Extend the wires to their connections.
WARNING! All customer supplied wires that connect to the positive terminal of the battery must be sized to supply at least
125% of the maximum operating current and FUSED at the battery to carry the load. DO NOT USE CIRCUIT BREAKERS WITH
THIS PRODUCT!
IMPORTANT! Before returning this vehicle to active service, visually confirm the proper operation of this product, as well as all
vehicle components/equipment.
3.438"
6.876"
.454"
.909"
1.380"
2.760"
1.188"
2.375"
3.281"
6.562"
3.050"
6.100"
1/4” Mounting
Hole (Qty. 4)
CUT-OUT and REMOVE THIS AREA CUT-OUT and REMOVE THIS AREA CUT-OUT and REMOVE THIS AREA
MOUNTING DIAGRAM / 700 SERIES HALOGEN LIGHTHEAD MOUNTING DIAGRAM / 700 SERIES HALOGEN LIGHTHEAD
NOT TO SCALE / For reference only. NOT TO SCALE / For reference only. NOT TO SCALE / For reference only.