Whelen 5BKT1 User Manual

Automotive: li ghtheads automot ive: li ghtheads

Page 1

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

1. Following the manufacturers instructions, remove the vehicle grill. The lighthead bracket will mount to the flat surface area that the grill mounts to. You

will secure the bracket with one of the grill’s mounting studs and its nut.

2. Mount the lighthead to the mounting bracket. Line the bracket (with lighthead) up with one of the holes that the grill mounts to. As you remount the grill,

insert the selected stud through the brackets mounting hole as shown.
NOTE: The holes on the bracket that you mount the lighthead to are made so that you may level the lighthead after mounting.

3. After making sure that the lighthead is level, replace the nuts that secure the grill (and lighthead). Extend the lighthead wires to your power source.

NOTE: Refer to your lighthead manual for all wiring, lighthead specifications, and safety information.

HOOD LATCH

MOUNTING SURFACE

RADIATOR

10-24 X 1"

P P H M S

EXISTING GRILL NUT

GRILL

MOUNTING

STUD

GRILL

10-24 STEEL or

CAD PLATED

WIZ NUT

GRILL

1. Following the manufacturers instructions, remove the vehicle grill. The lighthead bracket will mount to the flat surface area that the grill mounts to. You

will secure the bracket with one of the grill’s mounting studs and its nut.

2. Mount the lighthead to the mounting bracket. Line the bracket (with lighthead) up with one of the holes that the grill mounts to. As you remount the grill,

insert the selected stud through the brackets mounting hole as shown.
NOTE: The holes on the bracket that you mount the lighthead to are made so that you may level the lighthead after mounting.

3. After making sure that the lighthead is level, replace the nuts that secure the grill (and lighthead). Extend the lighthead wires to your power source.

NOTE: Refer to your lighthead manual for all wiring, lighthead specifications, and safety information.

HOOD LATCH

MOUNTING SURFACE

RADIATOR

10-24 X 1"

P P H M S

EXISTING GRILL NUT

GRILL

MOUNTING

STUD

GRILL

10-24 STEEL or

CAD PLATED

WIZ NUT

GRILL

Automotive:

ghtheads

Automot

ive:

ghtheads

Installation Guide:

500 Series TIR6™ Super-LED® Lighthead

Mounting Bracket (92-present Crown Victoria)

ENGINEERING COMPANY INC.

Internet: www.whelen.com
Sales e-mail: [email protected]
Canadian Sales e-mail: [email protected]
Customer Service e-mail: [email protected]

Installation Guide:

500 Series TIR6™ Super-LED® Lighthead

Mounting Bracket (92-present Crown Victoria)

ENGINEERING COMPANY INC.

Internet: www.whelen.com
Sales e-mail: [email protected]
Canadian Sales e-mail: [email protected]
Customer Service e-mail: [email protected]

For warranty information regarding this product, visit www.whelen.com/warranty