Whelen MIRROR15 User Manual
Page 2
Page 2
10-24 X 7/8 PPHMS (QTY 3)
10-24 ELASTIC
STOP NUT (QTY 3)
10-24 X 5/8
U-BOLT (QTY 2)
10-24 ELASTIC
STOP NUT (QTY 4)
Mirror Mount Installation:
1.
Secure the Beacon to the bracket using the supplied sheet metal screws and elastic stop nuts.
2.
Secure the bracket to the mirror (or other part of the vehicle) using the two supplied U-Bolts and elastic stop
nuts.
IMPORTANT! It is the responsibility of the installation technician to make sure that the installation and
operation of this product will not interfere with or compromise the operation or efficiency of any vehicle
equipment!
IMPORTANT! Before returning the vehicle to active service, visually confirm the proper operation of this
product, as well as all vehicle components/equipment.
This manual is related to the following products: