EnGenius Technologies ESR9855G - Manual (Page 68)

68
68
Manual Uplink Speed: Specify an uplink speed or select it from the drop-down list. If Automatic Uplink Speed is disabled, this option
allows you to set the uplink speed manually. Uplink speed is the speed at which data can be transferred from the router to your ISP.
Connection Type: By default, the router automatically determines whether the underlying connection is an xDSL/Frame-relay network
or some other connection type (such as cable modem or Ethernet), and it displays the result as Detected xDSL or Frame Relay
Network. If you have an unusual network connection in which you are actually connected via xDSL but for which you configure either
Static or DHCP in the WAN settings, setting this option to xDSL or Other Frame Relay Network ensures that the router will recognize
that it needs to shape traffic slightly differently in order to give the best performance. Choosing xDSL or Other Frame Relay Network
causes the measured uplink speed to be reported slightly lower than before on such connections, but gives much better results.
Click on the Save Settings button to store these settings.
Enable StreamEngine: Check this box to enable this feature. Enable this feature for better performance and experience with online
games and other interactive applications, such as VoIP.
Automatic Classification: Check this box to enable this option. This option is enabled by default so that your router will automatically
determine which programs should have network priority.