Understanding the hardware – EnGenius Technologies ESR9855G User Manual
Page 16
16
16
2. Understanding the Hardware
2.1. Hardware Installation
1. Place the unit in an appropriate location after conducting a site survey.
2. Plug one end of the Ethernet cable into the LAN port of the device and another end into your PC/Notebook.
3. Plug one end of another Ethernet cable to WAN port of the device and the other end into you cable/DSL modem (Internet)
4. Insert the DC-inlet of the power adapter into the port labeled “DC-IN” and the other end into the power socket on the wall.
This diagram depicts the hardware configuration
WLAN Router
PC
Power Outlet
Ethernet
AC/DC cable
Ethernet
Cable / DSL
Modem