Pptp (point-to-point tunneling protocol) – EnGenius Technologies ESR9855G User Manual
Page 25
25
25
4.1.3. PPTP (Point-to-Point Tunneling Protocol)
The WAN interface can be configured as PPTP. PPTP (Point to Point Tunneling Protocol) uses a virtual private network to connect
to your ISP. This method of connection is primarily used in Europe. This method of connection requires you to enter a username
and password (provided by your ISP) to gain access to the Internet. The supported authentication protocols are PAP and CHAP.
Address Mode: PPTP can be used with a dynamic or static IP address. If you select the Dynamic IP radio button, then the IIP
address in the next field is not required. However, if you select the Static IP radio button, then the IP address in the next field is
required.
PPTP IP Address: Specify the IP address
PPTP Subnet Mask: Specify the subnet mask for the IP address.
PPTP Gateway IP Address: Specify the IP address of the PPTP gateway.