EnGenius Technologies ESR9855G - Manual (Page 67)

67
67
6.3.5. StreamEngine
The StreamEngine feature helps improve the network performance by prioritizing applications.
Enable Traffic Shaping: Check this box to enable traffic shaping. When this option is enabled, the router restricts the flow of
outbound traffic so as not to exceed the WAN uplink bandwidth.
Automatic Uplink Speed. Check this box to enable automatic uplink speed. When enabled, this option causes the router to
automatically measure the useful uplink bandwidth each time the WAN interface is re-established (after a reboot, for example).
Measured Uplink Speed: Displays the uplink speed. This is the uplink speed measured when the WAN interface was last re-
established. The value may be lower than that reported by your ISP as it does not include all of the network protocol overheads
associated with your ISP's network. Typically, this figure will be between 87% and 91% of the stated uplink speed for xDSL
connections and around 5 kbps lower for cable network connections.