EnGenius Technologies ESR9855G User Manual
Page 44
44
44
6.2.3. Network Settings
This device can be configured at a Router or a Bridge. Select Router mode if the WAN port is connected to the Internet. Select
Bridge if the device is connected to a local network downstream from another router.
6.2.3.1. Bridge Mode
In this mode, the device functions as a bridge between the network on its WAN port and the devices on its LAN port and those
connected to it wirelessly. Select the Bridge Mode radio button.
WAN Port Mode: Select the Bridge Mode radio button.
Router IP Address: Specify the IP address of this device.
Subnet Mask: Specify the subnet mask for the IP address.
Default Gateway: Specify the IP address of the upstream router.
Primary/Secondary DNS: Specify the IP address of the DNS server.
Click on the Save Changes button to store these settings.