Electrolux EDI 96150 W - Manual (Page 41)

levelling the appliance electrolux 41
Levelling the appliance
The four feet of the appliance are pre-
adjusted.
Large degrees of unevenness can be
compensated for by individually adjust-
ing the height adjustable screw feet.
To do this lift the appliance and turn the
adjustable feet in or out.
Important Do not use pieces of wood,
cardboard or such like to level out une-
venness in the floor, but adjust the
height adjustable screw feet instead.
Changing door stop
The stop on the door of the appliance
can be changed if required to make it
easier to load and unload laundry.
The door stop must not be changed if
this would result in the appliance’s door
stop being located on the opposite side
of the door stop of a facing door.
Warning! The door stop may only be
changed by a qualified person. If
necessary, please contact our after-
sales service.
Special accessories
The following special accessories are
available from your Electrolux Service
Force Centre or your specialist dealer:
Intermediate installation kits for
stacked washer and iron aid appli-
ance:
These intermediate installation kits can
be used to arrange the iron aid appli-
ance and an automatic Electrolux wash-
ing machine (60cm wide, front loading)
as a space-saving washer/iron aid
stack. The automatic washing machine
is at the bottom and the iron aid appli-
ance is at the top.
Two versions can be supplied:
Read the manual supplied with the in-
stallation kit carefully.
– without stacker plate
– with extractable stacker plate