Electrolux EDI 96150 W - Manual (Page 14)

14 electrolux iron aid
TM
- steam-system
Iron Aid
TM
- Steam-System
Fill water tank
You must fill up the water tank before
using an Iron Aid programme for the first
time. Use the distilled water provided if
there is not yet any condensed water
from previous drying programmes (see
chapter on ‘Cleaning and Maintenance,
Emptying condensed water container’).
If, after an Iron Aid programme is select-
ed, the
water tank indicator on the
display lights up, you will need to fill up
the water tank with distilled water. Oth-
erwise, you will not be able to start any
Iron Aid programme.
Important Only fill the water tank
with distilled or fully desalinated
water. Do not use tap water or addi-
tives! You can also use the con-
densed water from the tank, as long
as you filter it first (use the canister
supplied with the filter fitted: see
figure opposite).
1. Pull drawer containing condensed
water container out a little (1), then
pull out the water tank’s filler neck
(2).