Emptying the condensed water container – Electrolux EDI 96150 W User Manual
Page 30
30 electrolux cleaning and maintenance
Emptying the condensed water
container
Empty condensed water container after
every drying cycle.
If the condensate tank is full, an active
programme will break off automatically
and the TANK display will light up. In or-
der to continue the programme, the
condensed water container must first be
emptied.
Warning! The condensate is not
suitable for drinking or for preparing
foodstuffs.
1. Pull drawer containing condensed
water container
all the way out (1) and pull up the
condensed water container’s drain-
age pipe as far as it will go (2).
2. Pour out the condensate into a basin
or similar container.
3. Push drainage pipe in and refit con-
densed water container.
If the programme has been interrupted
as a result of the condensed water con-
tainer being full:
Press the START/PAUSE button to con-
tinue the drying cycle.
The condensed water container has
a volume of approx. 4 litres. This is
sufficient for around 6kg of laundry
which has previously been spun at
1000 revolutions/minute.