Electrolux EDI 96150 W - Manual (Page 39)

electrical connection electrolux 39
Electrical connection
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent per-
son.
WARNING – THIS APPLIANCE
MUST BE EARTHED.
The manufacturer declines any lia-
bility should these safety measures
not be observed.
Before switching on, make sure the
electricity supply voltage is the same as
that indicated on the appliance rating
plate.
Important:
The plug must be accessible after the
appliance has been installed.
The appliance is supplied with a 13 amp
plug fitted. In the event of having to
change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1363) fuse
must be used.
Should the plug need to be replaced for
any reason, proceed as described be-
low.
The wires in the mains lead are coloured
in accordance with the following code:
• The wire coloured green and yellow
must be connected to the terminal
marked with the letter “E“ or by the
earth symbol
E or coloured green
and yellow.
• The wire coloured blue must be con-
nected to the terminal “N“ or
coloured black.
Green and Yellow: Earth
Blue: Neutral
Brown: Live