Electrolux EDI 96150 W - Manual (Page 40)

40 electrolux electrical connection
• The wire coloured brown must be
connected to the terminal marked
“L“ or coloured red.
• Upon completion there must be no
cut, or stray strands of wire present
and the cord clamp must be secure
over the outer sheath.
WARNING! A cut off plug inserted
into a 13 amp socket is a serious
safety (shock) hazard. Ensure that
the cut off plug is disposed of safely.
Permanent Connection
In the case of a permanent connection it
is necessary that you install a double
pole switch between the appliance and
the electricity supply (mains), with a min-
imum gap of 3mm between the switch
contacts and of a type suitable for the
required load in compliance with the
current electrical regulations.
The switch must not break the yellow
and green earth cable at any point.
This appliance complies with the re-
quirements laid out in the EEC Directive
76/899.
Voltage 240 V AC: Fuse rating 13amps
See rating plate for further information.
This appliance meets VDE require-
ments.
Particular regulations of local electricity
authorities must be observed.
This appliance conforms to EEC Direc-
tive No. 82/499/EWG on radio interfer-
ence.
WARNING! Repairs to electrical ap-
pliances must only be carried out by
trained personnel. Improper repairs
may lead to serious risks for the us-
er.