Electrolux EDI 96150 W - Manual (Page 20)

20 electrolux overview of iron aidtm programmes
Delay timer
With the DELAY button, you can de-
lay the start of a programme by be-
tween 30 minutes (30') and a
maximum of 20 hours (20h).
1. Select the programme and addition-
al functions.
2. Press the DELAY button as many
times as necessary until the required
start delay appears on the display,
e.g. 12h if the programme is to be
started in 12 hours.
If the display is showing 20h and you
press the button again, the time de-
lay will be cancelled. The display will
show 0' and then the duration of the
selected programme.
3. To activate the delay timer, press the
START/PAUSE button. The amount
of time remaining until the pro-
gramme is set to start is continuous-
ly displayed (e.g. 15h, 14h, 13h, …
30
'
etc).
Child safety device
(
The child lock can be set to prevent a
programme being accidentally started
or a programme in operation being acci-
dentally changed.
The child safety device locks all buttons
and the programme knob.
The child safety device can be activated
or deactivated by holding down the
BUZZER and TIME buttons simultane-
ously for 5 seconds.
–
Before programme is started: Appli-
ance cannot be used
– After programme is started: Pro-
gramme in operation cannot be
changed
The
( symbol appears in the display to
indicate that the child safety device is
activated.
The child safety device is not deactivat-
ed once the programme comes to an
end.
If you want to set a new programme,
you must first deactivate the child safety
device.