KEPCO RA 60 Rev 1, 2, 3 - Manual (Page 12)

1-4
RA60 SERIES090910
1.4 ACCESSORIES
Accessories for HSP Power Supplies are listed in Table 1-2.
TABLE 1-1. RACK ADAPTER OPTIONS
MODEL DESCRIPTION
RA 60, RA 62, RA 63 Accommodates up to three HSP Power Supplies in a 19-inch rack. Used for
hot-swap independent, series or parallel/redundant applications where
HSPs are plugged in to the rack adapter and can be easily removed and
inserted without affecting system operation.
RA 60-23E, RA 62-23E, RA 63-23E Same as RA 60, RA 62, RA 63 except mounting ears are wider to accom-
modate a 23-inch rack.
RA 60-24E, RA 62-24E, RA 63-24E Same as RA 60, RA 62, RA 63 except mounting ears are wider to accom-
modate a 24-inch rack.
TABLE 1-2. ACCESSORIES
ACCESSORY PART NUMBER USE
MOUNTING
BRACKETS
(NOTCHED)
128-1714
Used to mount RA 60, RA 62, or RA 63 in 19-inch rack using “set back” position (see
Figure 2-4).
128-1736
Used to mount RA 60, RA 62, or RA 63 in 23-inch rack using “set back” position (see
Figure 2-4).
128-1827
Used to mount RA 60, RA 62, or RA 63 in 24-inch rack for both flush and “set back”
positions (see Figure 2-4).
MOUNTING
BRACKETS
(UNNOTCHED)
128-1631 Standard mounting ear for 19-inch rack applications.
128-1776
Used for standard (flush) mounting of RA 60, RA 62, or RA 63 in 23-inch rack (see
Figure 2-4).
CONNECTORS
142-0422 I/O connector mating plug.
108-0294 I/O connector backshell.
FILLER
PANELS
RFP 60-1 Covers 1/3 of front panel.
RFP 60-2 Covers 2/3 of front panel.
ALUMINUM FEET 158-0004 Aluminum feet attach to bottom of rack adapter (set of four).
SCREW 101-0215 Used to attach aluminum feet to rack adapter.
SLIDE KIT
(preferred)
Kit 219-0433
Slide Kit includes two slides, mounting brackets and attaching hardware; allows rack
adapter to be pulled out of rack. Recommended for 18-20 inch setback to intermedi-
ate cabinet rail.
SLIDE KIT Kit 219-0442
Slide Kit includes two slides, extended mounting brackets and attaching hardware;
allows rack adapter to be pulled out of rack. Recommended for 22-26 inch setback
to intermediate or rear cabinet rail if Kit 219-0433 can not be used.
SAFETY COVER, AC 137-0136 Cover source power connections.
SAFETY COVER, DC 137-0135 Cover output power connections.
SCREW 101-0456 Pan head, phillips, self-forming, 6-32 x 1/4 used to attach safety covers.
SUPPORT BRACKET 128-1775
Pair required. Used to provide side support for rack adapter. Requires rear rail at 18-
13/16 in. setback.