TA Triumph-Adler DC 6025 - Manual (Page 86)

5-9
Receiving Faxes > Fax reception settings
Fax reception settings
Duplex Print Output
When received multiple pages of data are the same width, they can be printed out on both sides of paper having the
same width as the data.
For more information about configuring settings, refer to Default fax settings on page 9-2.
2 in 1 Print
When you receive a multi-page Statement or A5 size original, this function prints 2 pages of the original at a time on one
Letter or A4 size sheet of paper.
For more information about configuring settings, refer to Default fax settings on page 9-2.
Batch Print
When a multi-page fax is received, the pages are printed in a batch after all pages are received.
For more information about configuring settings, refer to Default fax settings on page 9-2.
Reduced Reception
When the reception size is larger than the paper size, you can reduce the print size.
For more information about configuring settings, refer to Default fax settings on page 9-2.
Reception Date/Time
Reception Date/Time function adds the reception date/time, sender information and number of pages on the top of each
page when the message is printed out. It is useful for confirming the time of reception if the fax is from a different time
zone.
On Print on both sides.
Off Do not print on both sides.
On Print 2 in 1.
Off Do not print 2 in 1.
On Print as a batch after all pages are received.
Off Print each page as it is received.
On Print the received data by reducing the original size according to the
paper size.
Off Print the received data at 100% of the original size by dividing it into
several sheets of paper.
NOTE
When the received data is printed on multiple pages, the reception date/time is printed on
the fist page only. It is not printed on the pages that follow. When the received fax data is
forwarded after retrieving it from memory, the reception date/time is not added to the
forwarded data.