TA Triumph-Adler DC 6025 - Manual (Page 100)

6-12
Using Convenient Fax Functions > Memory Forwarding
Settings for Forwarding from Embedded Web Server (RX/
Forward Requirements)
You can use Embedded Web Server on a computer connected to the network to specify the forwarding settings on this
machine.
Refer to the machine’s Operation Guide for information on the network settings.
Accessing Embedded Web Server
1
Display Embedded Web Server.
1 Open the web browser.
2 In the Address or Location bar, enter the machine’s IP address as the URL, e.g.
192.168.48.21/. The web page displays basic information about the machine and
Embedded Web Server as well as the current status of the machine.
2
Select settings in Embedded Web Server.
Select a category from the navigation bar on the left to view and set values for that particular
category.
If administrator privileges have been enabled on Embedded Web Server, remember to enter
the correct user name and password when trying to access the relevant screens.
For details, refer to the Embedded Web Server Operation Guide.