Fax output destination – TA Triumph-Adler DC 2116 User Manual
Page 104

System Settings
3-22
ADVANCED OPERATION GUIDE
NOTE:
This item is displayed only if the optional Finisher or Job
Separator is installed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press
S or T to select Copy
Otput Destn and press [Enter].
3
Press
S or T to select the output
destination required and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Fax Output Destination
Use to set the paper output destination with priority for received fax data
and various reports.
NOTE:
This item is displayed only if the optional Fax kit and Finisher or
Job Separator are installed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press
S or T to select Fax
Output Destn and press [Enter].
3
Press
S or T to select the output
destination required and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Machine Default:
Copy Otput Destn
Top Tray
:
:
Low Power Time :
Sleep Mode Time
30Min.
15Min.
Copy Output Destination:
Top Tray
Finisher
*
Setting Item
Output Destination
Top Tray
Main body output tray
Finisher
Optional Finisher
Job Separator
Optional Job Separator
Machine Default:
Fax Output Destn Top Tray
:
Copy Otput Destn Top Tray
:
Low Power Time : 30Min.
Fax Output Destination:
Top Tray
Finisher
*