EZQuest DVD Duplication - Manual (Page 44)

You can get the newest firmware version from ACARD by e-mail, or download it
directly from the web site:
http://www.acard.com Then, unzip the file ìcdxxx.binî
and copy it into a blank DVD.
After placing the DVD on the DVD-ROM , press ENT . The system will begin
searching the new firmware and show the message on LCD as follows after it finds
the new firmware. Then press
ENT to update.
Searching F/W---
XXX/XXXXX
5.12.8 Compare Firmware
On the above figure press ESC and t
to enter the following figure.Compare
Firmware is to compare the current firmware version and the newly downloaded
version. It can prove if the downloaded version is the newest one.
12-08. Adv Setup
Compare Firmware
5.12.9 H/W Diagnostic
Press ESC and t to enter the next figure. H/W Diagnostic is to test the system.
12-09. Adv Setup
H/W Diagnostic
Page 44