EZQuest DVD Duplication User Manual
Page 42
Press
ENT to enter the next figure. Use
s t
to confirm Disk or Parti.
Verify Disk or
Partition? Disk
Press
ENT to verify. After verification LCD will show the results as follows.
Verify Hard Disk
OK!
5.12.6 Burn-in
On the above figure press
ESC and
t
to enter the following figure. Burn-in is to
simulate the copying progress many times. The time can be from 1 to 1000. After
each cycle of simulation, the DVDs on the DVD writers will eject automatically and
recede for the next bout of simulation.
12-06. Adv Setup
Burn-in
Press
ENT to enter the next figure. Test is simply a simulation.
Burn-in
Test
Page 42