Connecting usb cable, Connecting the power cable – TA Triumph-Adler 261ci User Manual
Page 47
2-11
Preparation before Use > Connecting Cables
Connecting USB Cable
The equipment can be connected with a USB cable and used as a printer or scanner in an environment where there is
no network.
1
Power Off.
2
Connect the machine.
1
Connect the USB cable to the appropriate interface located on the right side of the body.
2
Connect the other end of the cable to the PC.
Connecting the Power Cable
1
Remove the Power Cord Connector Cover.
Check that the indicators are off.
1
2