TA Triumph-Adler 261ci - Manual (Page 281)

9-25
Setup, Registration, and User Management > System Menu
Basic
* The setting will be changed after restarting the device or network.
Network Interface (Send)
Item Description
Host Name Check the host name of the machine standard NIC. Host name can be changed from
Embedded Web Server RX.
Refer to Changing Device Information on page 2-33
TCP/IP Setting For details on setting value, refer to TCP/IP Settings on page 9-19.
LAN Interface Select the LAN Interface type. *
Value : Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
NOTE: This function is displayed when the optional Network Interface Kit is installed.
MAC Address Filter Select whether to use MAC Address Filter.
See the Operation Guide for the optional network interface card for details.
Value : Off, On
Restart Network Restarts the network card of the device.
NOTE
This function is displayed when the optional Network Interface Kit is installed.
Item Description
Network Interface (Send) Specify the network interface card to be used for send function and connecting to external
address book.
Value : Standard, Optional NIC