Notice for installation – Rugged Cams Fusion DVR User Manual

Page 5

4CH User Guide

Notice for installation

All of below notices should be verified before installation and operation.

☞ Do not install DVR in moist, dusty or dirty locations.

☞ Do not expose the system to intense heat or direct sunlight

☞ This system should not be located close to magnetic materials or vibrating
equipment.

☞ Do not install the system in environments with extreme temperatures. (Operating
Temperature 5 °C ~ 40 °C)

☞ Place the system away from debris that may fall into the ventilation slots of the
system.

☞ Ensure the power switch is in the OFF position prior to installation.

☞ Place the system in a location with enough space for cable connections.

☞ Install and operate the system in a well-ventilated place without vibration.

☞ System may be susceptible to interference if placed to close radio or television units.

☞ Do not disassemble system.

☞ Power Overload : Please be sure to connect the system to a power supply within the
indicated range.

☞ If a system is connected to the power directly, please ensure i t is grounded properly