Rugged Cams Fusion DVR - Manual (Page 28)

4CH User Guide
1-6. Storage
Storage Setup and HDD Format
[Table 1-6] Storage Menu
Setup value can be saved onto USB memory stick.
USB Recording
Format hard disk drive HDD Format
The DVR is designed to be upgraded through firmware updates.
In order to upgrade, the upgrade firmware must firstly be downloaded and copied
into a USB device. Create a new folder in the USB memory stick a nd copy the
upgrade firmware “app.bin” into the folder. This folder name should be “upgrade”.
After the upgrade firmware is copied into the USB memory stick, do the following:
1. Connect USB memory stick into the USB port.
2. Go to the STORAGE and select the USB UPGRADE.
3. Select CONFIRM and then the upgrading will start automatically.
4. After the upgrade is completed, DVR will reboot automatically.
USB Upgrade
Setup value that is saved on USB memory stick from SAVE SETUP TO A USB can
be uploaded. After the upgrade is completed, DVR will reboot automatically and
Setup value will be applied.
USB Load
Overwrite existing material when hard disk drive is full Overwriting
Description Item
28