Rugged Cams Fusion DVR - Manual (Page 46)

4CH User Guide
Click this icon to lock all operations of client software LOCK
Click this icon to see live video. LIVE
Click this icon to search for recorded videos. SEARCH
Click this icon to disconnect from the DVR
Once you click the connection icon, this pop up
window appears. Enter the IP address and the port
number. Then select the protocol type and enter the
password.
Caution :Port No: It should be the same as
the DVR’s port No. Password: It should be same as
the DVR’s network password. (The default password
is 1111)The Remote access should be set to on in
the NETWORK setup menu on DVR.
Once you click the lock or unlock icon, this pop up
window appears. You need to remember the pass
word and enter the password when you try to operate
the client software again. (We will not be able to help
you with this password if you forget what it is.)
Click this icon to unlock all operations of client
software.
UNLOCK
Click this icon to play live video. PLAY
User can control PAN/TILT & ZOOM/FOCUS of the
remote camera.
PAN left /right TILT up/down
ZOOM in/out FOCUS in/out
Description Button
46