To connect to power – RIGOL DG4000 Series User Manual
Page 72
RIGOL
Quick Guide for DG4000
16
To Connect to Power
DG4000 accepts the AC power supply: 100V to 240V, 45Hz to 440Hz. Please use the
power cable provided in the accessories to connect the instrument to AC power (as
shown in Figure 7). At this point, the generator is powered on and the power button
at the lower-left corner of the front panel is in breathing state.
Figure 7 To Connect to Power
CAUTION
If the power fuse needs to be changed, please return the instrument back
to our factory and the
RIGOL authorized operator will change it for you.