RIGOL DG4000 Series User Manual

Page 67

RIGOL

Quick Guide for DG4000

Burst----Burst

Generate burst waveforms of Sine, Square, Ramp, Pulse and Arbitrary waveform
(except DC).
 Support three burst types: N Cycle, Infinite and Gated.
 Noise can also be used to generate Gated burst.
 Support three trigger sources: Internal, External and Manual.
 When the function is enabled, the backlight of the button turns on.
Note: when the instrument is working in remote mode, press this key to return to
local mode.

16. Return

This key is used to return to the previous menu.

17. Shortcuts/Utility

Print: save the content shown on the screen as image in USB storage device.

Edit: this key is the shortcut of “Arb  Edit Wform” and is used to enter the

ArbEdit interface quickly.

Preset: used to return the instrument state to default or user-defined states.

Utility: used to set the parameters of system. When this function is enabled, the

backlight of the button turns on.

Store: store or recall the instrument state or user-defined arbitrary data.

 Support file management system to execute normal file operations.
 Provide a built-in non-volatile memory (C Disk) and an external USB storage

device (D Disk).

 When the function is enabled, the backlight of the button turns on.

Help: to get context help information about any front-panel key or menu softkey,

press this key until it is illuminated and then press the desired key.

18. LCD

800 × 480 TFT color LCD is used to display the current function menu and
parameters setting, system state as well as prompt messages.