RIGOL MSO/DS1000Z Series User Manual

Page 6

-5-

2. 安装机架前面板：将前面板用 6 颗 M4 螺钉固定在上一步装好的框架上。

Install the front panel of the rack mount kit: fix the front panel onto the frame
installed in the previous step using six M4 screws.

3. 固定仪器脚部：用两个压脚将仪器紧扣在底板上，用 4 颗 M4 螺钉将其固定。

Fix the bottom of the instrument: fix the instrument onto the support board using
two pressure feet and four M4 screws.

This manual is related to the following products: