安装步骤installation procedure, 安装步骤 installation procedure – RIGOL MSO/DS1000Z Series User Manual

Page 5

Text mode
Original mode

-4-

安装步骤

Installation Procedure

仅授权人员方可执行安装操作，不正确的操作可能导致仪器损坏或不能正确安装到机架

内。

Only authorized operators can execute the installation operation. Improper installation
might result in damage of the instrument or incorrect installation of the instrument on
the rack.
1. 安装左右侧板：左右侧板的卡位对准底板的豁口后插入底板，用 4 颗 M4 螺钉将其

固定。

Install the right and left plates: align the detents of the right and left plates with
the openings on the support board and insert them into the support board
respectively, then fix them with four M4 screws.

This manual is related to the following products:

DG4000 Series