RIGOL MSO/DS1000Z Series - Manual (Page 4)

-3-
安装工具
Installation Tool
推荐使用
PH2 号头十字改锥。PH2 Phillips Screwdriver (recommended).
安装空间
Installation Space
本机架安装到机柜内须满足如下要求：
 机柜必须为
19 英寸标准机柜。
 机柜至少有
4U 的空间（177.8 mm）。
 机柜内深度至少
180 mm。
仪器上架后的尺寸如下图所示。
The following requirements must be fulfilled by the machine cabinet in which the
instrument is mounted.
 The machine cabinet must be a standard 19-inch one.
 At least 4U (177.8 mm) space should be provided by the machine cabinet.
 The depth inside the machine cabinet should not be less than 180 mm.
The dimension of the instrument after being installed is as shown below.