Extron electronic MTP U R RS SEQ - Manual (Page 27)

Specifications
MTP U R Series • Specifications 23
Specifications
Video
Gain ................................................ Unity
Video input
Number/signal type ..................... 1 set of proprietary analog signals
Connectors .................................... 1 female RJ-45
Video output
Number/signal type ..................... 1 RGBHV, RGBS, component video
(bi-level and tri-level), S-video,
composite video (always input type)
Connectors
MTP U R RSA SEQ ......... 1 female 15-pin HD for RGB
3 BNC female for Y, R-Y, B-Y
(1) 4-pin mini DIN for S-video (Y/C)
1 BNC female for composite video
Other models .................. 1 female 15-pin HD for RGB or Y, R-Y, B-Y
(1) 4-pin mini DIN for S-video (Y/C)
1 BNC female for composite video
Nominal level ................................ 1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component
video and for C of S-video
Minimum/maximum levels ........ 0.8 V to 1.2 Vp-p
Impedance ..................................... 75 ohms (during video output only)
Return loss ..................................... <-30 dB @ 5 MHz (during video output
only)
DC offset ........................................ <±20 mV with input at 0 offset
Sync
Output type .................................... RGBHV, RGBS
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, SECAM
Output level .................................. 4.0 V to 5.0 Vp-p, unterminated
Output impedance ....................... 87 ohms (24 mA)
Polarity............................................ Positive or negative (selectable)
Audio — MTP U R RSA SEQ, MTP U R A
Gain ................................................ Unbalanced output: 0 dB;
balanced output: +6 dB
Frequency response ..................... 20 Hz to 20 kHz, ±1 dB