Retrotec MN BD3 & RT1000 - Manual (Page 8)

Page 8 of 8
SP801 rev-2011-09-07
Flow ranges:  7 flow ranges, included  3 flow ranges included
 3 additional ranges optional
Fan cross-section:
Flexible homogenous 2 piece injection
molding held together with 7 rivets on
flange. Fiber reinforced 2 piece injection
molding held together with 4 rivets on
flange.
Fan top:
On board speed control allows speed to
be controlled using a knob on the fan top
or use the 6 ft umbilical to connect to the
digital gauge. An optional remote will
control the fan up to 100 ft away.
Gauge connection status light.
Power connection status light.
Run up to 24 fans together with daisy
chain Ethernet connectors.
External speed control allows speed to
be controlled using a knob on the
control box up to 6 ft away or a
computer.
Reversing switch.
Flow connections: Tapered fan pressure fitting, color
coded to match tubes.
Barbed fan pressure fitting, brass.
Fan control: Power (120 or 240V) using computer
style power plug. Ethernet cable
supplies speed signal to on-board speed
controller. Variable power (120 or 240V) using
computer style power plug from remote
speed controller attached to gauge.