Remote Processing BASIC for the CX-10 Modbus - Manual (Page 17)

BASIC PROGRAMMING GUIDE
2-8
CLEAR TICK
Syntax: CLEAR TICK(timer)
Where: timer = 0 to 3
Function: Resets specified tick timer
Mode: Command, Run
Use: CLEAR TICK(1)
DIFFERENCES FROM BASIC-52
The TICK function replaced TIME as a process clock. See TICK function for more information.
DESCRIPTION
There are four independent tick timers that can be cleared independently of each other. This statement resets
any one of the four tick timers to 0.
RELATED
TICK
ERRORS
BAD SYNTAX Any parameters left out
BAD ARGUMENT When timer > 3 or negative