Epson 500 - Manual (Page 46)

46
Using Cinema Color Editor
Remote Control Operations
You can use Cinema Color Editor to change the image source, adjust the aspect ratio, or turn
the power on or off—just as you would from the remote control.
Caution: Do not use the remote control or projector buttons to operate the projector while Cinema
Color Editor is in use. If a problem occurs, select Update to Latest Status from the Projector menu
in Cinema Color Editor.
1. Click the Remote Control tab.
2. Click one of the buttons for the options shown above.
Note: To be able to turn the projector on from Cinema Color Editor, Network Monitoring must
be turned on (see page 38).
Select Remote Control
Turn the projector on/off
(see note below)
Change the image source
(see page 22)
Adjust the aspect ratio
(see page 23)