Setting the tag display ( tag ) – Precision Digital PD6820 User Manual
Page 32
PD6820 Loop-Powered Process Meter Instruction Manual
32
Setting the Tag Display (tag)
The meter can be set to display a combination of seven alphanumeric characters for
engineering units (e.g. GALLONS) or for identification (e.g. TANK 3). Press Right arrow
to select next unit and Up arrow to increment unit.
To automatically cycle the lower display between total reading for ten seconds
and tag for two seconds, choose tOgle.
To disable the tag display and show only total reading uninterrupted on the
lower display, choose Off.
To show tag only on the lower display choose On. Totalizing continues in the
background, but is not shown while On is selected.
Selecting On or togle prompts for entry of the tag.
The unit being changed blinks.
Press the Enter button, at any time, to accept a setting or Menu button to exit without
saving changes.