Oki C532dn - Manual (Page 58)

- 58 -
3. Basic Operations
Loading Paper
This chapter describes various information about paper that can be loaded in a paper tray of
this machine.
To set paper type and weight, press the buttons on the operator panel to select
[Setting] > [Paper Setup] and select the tray you want to use, and then select [Media Type] or
[Media Weight].
• About Paper Types That Can be Loaded
• Loading Paper in Tray 1/2/3
• Loading Paper in the MP Tray
• Paper storage
Available paper types
To perform high-quality printing, be sure to use the supported paper types that satisfy
requirements, such as material, weight, or paper surface finishing. Use digital photo print
paper.
If you print on paper that is not recommended by Oki Data, check the print quality and the
movement of the paper thoroughly in advance to ensure that there are no problems.
• Paper type
About Paper Types That Can be Loaded
Paper type Paper size Paper weight
A4 210 x 297 64 to 220 g/m 2 (17 to 58 lb)
For duplex printing, 64 to 176 g/m 2
(17 to 47 lb)
If you set paper that is 148 mm
(5.8 inches) wide or narrower,
printing becomes slower.
A5 148 x 210
A6 105 x 148
B5 182 x 257
B6 128 x 182
B6 Half 64 x 182
Letter 215.9 x 279.4 (8.5 x 11)
Legal13 215.9 x 330.2 (8.5 x 13)
Legal13.5 215.9 x 342.9 (8.5 x 13.5)
Legal14 215.9 x 355.6 (8.5 x 14)
Executive 184.2 x 266.7 (7.25 x 10.5)
Statement (5.5 x 8.5)
8.5" SQ (8.5 x 8.5)
Folio 210 x 330
16K(184x260mm) 184 x 260
16K(195x270mm) 195 x 270
16K(197x273mm) 197 x 273
Index Card (3 x 5)
4x6 inch (4 x 6)
5x7 inch (5 x 7)
Custom Width: 64 to 216
Length: 90 to 1321 64 to 220 g/m 2 (17 to 58 lb)